Sunday, March 22, 2020

Serweta 1 Done!

    It has taken a while, but now it is done. The Serweta 1 is finished. I think it came out pretty well. I know where there are a few minor mistakes, but you would have a hard time chasing them down unless you were just obsessed with it. I think the longest round was round 9. That is the one with the 25 little stars that have to be done one at a time and attached as you go. Then there are 50 ends to sew in. It really wasn't that bad. You sew the ends as you go and it seems like there are not so many. This is now on my china hutch under a silver bowl.
    Keep in mind that the patterns in the book, "Tatted Treasures" by Jan Stawasz, are diagrammed. I do not recommend this for beginners. Intermediate will probably be OK. You need to be able to look at the diagram and understand how to get the tatting done. For instance, how did you get that ring? It is a thrown ring. Did you recognize that? Have you done those? Perhaps you need to use an SCMR somewhere. He does not always tell you this. Jan also has his method with picots that confuse people. This is why diagrammed patterns are not always for the beginner. If you do want to try this, on round 10 there are rings that have no stitch counts. I used 6+2-6 then 6+2+6. They are beside each other and joined.I got the counts from the photo as best as I could make it out. Seems to have worked.
    So now what to do? I have to try to "design" an edging. I am not a designer. I can follow instructions, but it takes an artist to design. I guess I will see what happens with that.

7 comments:

  1. Wow, really wow. Sounds as though it took some figuring out too.

    ReplyDelete
  2. Absolutely stunning 💖 And you get to admire it daily 😍

    ReplyDelete
  3. Well done, Tim. What an amazing project to do in such a tiny thread. Your advice to others is appreciated but I doubt I’ll be tackling it anytime soon. Good luck with the edging.

    ReplyDelete
  4. Congratulations, Tim. Following Jan's patterns is no mean feat. What an beautiful achievement!

    ReplyDelete
  5. Nice work! You might think of your mailbox project when designing. You know what your end product will look like, you know the components, just need to do some figuring to get there. I have confidence in your abilities.

    ReplyDelete